| JSF Hidráulica

Control de olores

DOMOS DE ALUMÍNIO - Alusphere | JSF Hidráulica

ALUMINIUM DOMES - ALUSPHERE®

ALUSPHERE® aluminium domes are versatile solid structures made ​​entirely of aluminium, suitable for circular process units.  They are lightweight, corrosion resistant and maintenance free. Aluminum will not rust like steel and do not degrade with UV rays like GRP. The design of the domes allows to cover large spans without intermediate supports and they transmit minimal stresses to the structures on which they rest. The triangular panels add flexibility to any operational requirement. Accessories such as doors, vents, hatches and skylights can be easily installed.

CUBIERTAS PLANAS DE ALUMINIO - Aluplan | JSF Hidráulica

ALUMINIUM FLAT COVER - ALUPLAN®

ALUPLAN® roofs are formed with aluminiun modules with omega cross section. They are supported on existing structures and auxiliary works are not necessary in most cases.


The panels that make the cover are easily removable, facilitating maintenance and operation of process units. They are very versative, adapting to different geometries of equipment: channels, thickeners, Archimedean screws, etc.. Its flat shape reduces the air flow to be treated and its structural strength allows operators to stand on them safely. Their cost / life is very competitive. They are used to cover rectangular or circular structures.

CUBIERTAS PLANAS DE ALUMINIO - Aludovel® | JSF Hidráulica

ALUMINIUM VAULTED COVER - ALUDOVEL®

Aluminium vaulted covers ALUDOVEL are systems designed to cover large spans without the need for intermediate supports.

 

Key advantages are:

  • They are lightweight structures.
  • Spans up to 30 m.
  • Very high corrosion resistance.
  • The deflection of the panels is minimal.

These covers are generally installed over large rectangular process units.

CUBIERTA GRECADA | JSF Hidráulica

ALUMINIUM TRAPEZOIDAL FLAT COVER - ALUGRECA®

ALUGRECA® roofs are formed with trapezoidal cross section aluminium modules assembled together. They are supported on existing structures and auxiliary works are not necessary in most cases


The panels that make the cover are easily removable, facilitating maintenance and operation of process units. They are very versative, adapting to different geometries of equipment: channels, thickeners, Archimedean screws, etc.. Its flat shape reduces the air flow to be treated and its structural strength allows operators to stand on them safely. Their cost / life is very competitive. They are used to cover rectangular or circular structures.

CUBIERTA FLOTANTE | JSF Hidráulica

FLOATING COVER - FLOATEC®

Floating covers  are flexible, freestanding  systems, made with geomebranes prepared to resist attacts from chemicals and environmental agents. The covers incorporate elements that allows them to addapt  to variations in the fluid level. They incorporate channel to drain rainwater accumulated on them. They are the most cost effective solution for covering large areas of water (homogenization tanks, leachate ponds, irrigations lagoons, etc.)

JSF hidráulica - All rigths reserved - Legal notice and Privacy Policy
Murillo 7, bloque 14, bajo dcha | 28223 Pozuelo de Alarcón (Madrid)
Tel. (+34) 91 512 02 79 | Fax (+34) 91 518 21 79 | e-mail: